Just a heads up that when the bead sets, it’s really loud and it can pinch anything nearby. Make sure your tire is inflated before you start, whether that means at a gas station, or with an air compressor, or an emergency tire inflator that hooks up to your car’s power. This will help you balance your wheel when you’re done. Once you’re almost finished, line up the balance dot with the valve stem on the rim. A little lube goes a long way here, so don’t forget to reapply after every few bites. You won’t be able to do it in one go, so take your time and be precise. In order to avoid making a mess, take small sections of the tire and work your way around the rim. You might need to use your tire irons to help with this part. To begin, push the first sidewall over the lip of the rim. We don’t want you to have to do the same job twice. Also, check the rotation marker on the tire and the rotation orientation on the rim. Shop motor gear here: Revzilla Get the new tire over the lip of the rim.īefore you start, make sure you have your lube and your tire irons ready. If you’re using zip ties, make sure that they are tight and secure before attempting to ride your motorcycle. The tire should pull free from the rim at this point. Once you have one side of the tire done, flip the rim and lever the other side over. If you have motorcycle tire changing tools, then use them to lever one side of the tire up over the rim. Grunting during this step is optional, but recommended. To deflate and break the bead on a motorcycle tire, you can either use a dedicated motorcycle tire bead breaker, tire irons, or by pushing down on the sidewall of the tire with your heel. To break the bead of the tire, use a dedicated tool or place your chubby friend’s weight on it. Simply spray it on the tire and rim before each step. This will act as a lubricant and make the process much easier. You’ve removed the wheel from the bike, now it’s time to mix up a 50/50 solution of warm water and dish soap. Shop here: Motorsport Products Tire Changing Stand You can shop the center stand if you don’t have one. Just make sure that it’s stable and that the wheels are off the ground. To do this, you’ll need to either jack it up or get it on some stands. Then, you can begin the process by removing your rear wheel from your bike. Motorcycle Tire Change: Removing The Old Tire Get Your Bike Off the Groundīefore you start your motorcycle tire change, you’ll need to acquire a replacement tire. Of course, you can always take it to your dealer or trusted mechanic, but if you’re reading this, chances are you prefer doing it yourself. Plus, working on your bike is a great way to get to know it better and build a stronger bond with your machine. However, it’s a relatively easy process that you can complete in an afternoon. If you’re new to motorcycle maintenance, changing a tire may seem daunting.
0 Comments
Leave a Reply. |